Quick Start Guide
2
Before operation
To turn on the device, press and hold the
Power
button on the unit and release it when
you see the boot-up screen. It may take one or two minutes to start up the system,
please be patient before you proceed.
To turn off the device, press and hold the
Power
button to bring up the “Power Off” option,
then tap on “Power Off” and “OK”.
Power On / Off the Device
The screen display will be locked when the device is idle for a few seconds.
You need to unlock the screen by dragging the lock icon
rightwards
before you continue to use the device.
Unlock the Screen Display
Charge the device when it indicates low battery. To charge the battery, connect the
device to any standard wall outlet via the DC-IN port using the power adaptor. It takes
about 5 hours to fully charge the battery. Your device can be charged via USB Port as
well. Use USB charger with rating of 5V 1A or above.
Charge the Battery
To install a memory card, find the card slot on the device and then insert the memory
card into the slot in the correct orientation.
Install Memory Card
You may need to transfer media files from a computer to the device.
(1) Connect the device to a computer with the supplied USB cable.
(2) Once the connection is done, an icon of mobile phone (internal memory) will
appear on your computer.
(3) Copy files from the PC to the internal memory or the memory card.
Transfer Files from PC
If the above operation does not work, use a pin to penetrate into the “pinhole reset”
button.
Reset the Device
During playback of music or video, you can tap on the progress bar to change the
playback progress.
General Touch Actions
