8
System Setup
Software Installation.
If you wish to control the projector via system Host, please install the PCC Setup Program.
Minimum system requirements:
Intel Pentium 200Mhz or up.
Windows 2000/ XP.
128M Memory.
30Mb Hard Disk.
Attention: PCC software is compatible with WIN2000/XP. The program may not function properly under
other software platforms.
Installation procedure:
Be sure to turn off the power supply to all equipment as well as the computer.
Please connect the random communication/ programming cable to the RS232 port of the
computer and the Host.
Turn on the power supply to the host and the computer.
Insert the CD-ROM into the computers CD-drive and follow the instructions.
Running the setup program.
Run the setup wizard program.
The computer will start searching for the Presenter Control Compact and the window shown in Figure 5
will appear.
Fig. 5
If the computer fails to find the Presenter Control Compact, the window shown in Figure 6 will appear.
Fig. 6
Summary of Contents for Presenter Control Compact
Page 1: ...PRESENTER CONTROL COMPACT ORDERCODE 100802 ...
Page 20: ...18 Appendix 1 PCC Block Diagram ...
Page 23: ......
