Designed, engineered, and
manufactured in Springfield, MO
using U. S. and global components.
LT‑1978 19333
I N T R U S I O N • F I R E • A C C E S S • N E T W O R K S
2500 North Partnership Boulevard
Springfield, Missouri 65803‑8877
800.641.4282 | DMP.com
736Q myQ INTERFACE
MODULE
Specifications
Dimensions
3.0” H X 1.4” W X 0.6” D
Compatibility
Z‑GD00Z Z‑Wave Garage Door Controller
myQ Garage Door Openers
S 2.0 Garage Door Openers
INPUT
FROM C
ONTR
OL
OUTPUT
TO OPENER
3
Mount the 736Q with screws or double-sided tape.
After restoring power to the system, allow the module to boot up for at least 30 seconds before attempting to
sync the garage door opener.
To sync the module and garage door opener, activate the control connected to the 736Q. Repeat this step until
the garage door opens when the control is activated.
MOUNT AND SYNC THE 736Q
ADDITIONAL INFORMATION
Troubleshooting 736Q Operation
If the garage door does not respond to control activation, complete the following troubleshooting steps.
1. Ensure the module and connected devices have power.
2. Ensure all wiring connections are correct.
3. Sync the control and garage door opener.
4. Check for sources of interference, such as metal objects or electronic equipment. Move the module if necessary
until the garage door opener successfully syncs with the control.
Safety Information
When using the 736Q to open or close garage doors, follow these safety procedures to avoid potential injury:
• Only install the module on sectional garage doors
• Only install the module on garage doors with openers that have secondary protection systems, such as
photoelectric sensors
• Install additional parts and equipment that provide audio and visual alerts when the garage door starts opening or
closing
Virtual Keypad
For information about managing Z-Wave garage doors and other home automation devices, refer to Virtual Keypad App
Help.
