Intrusion | Fire | Access | Network | Cellular
Intrusion | Fire | Access | Network | Cellular
SPEC SHEET
Keypad display FuncTion
End users can easily set screen brightness,
tone (frequency) and volume of keypad
touches. After tapping the desired function,
they can tap the bar graph to increase or
decrease each of the settings, for tone,
volume and brightness.
cusTomiZe your display
Insert a standard micro SD card in the
keypad slot to transfer your dealer logo
and dealer profile information to display on
the keypad. When pressed, it provides your
dealer contact information.
shield display
Basic arming and disarming has never
been easier with the interactive shield icon
displayed in the center of the keypad. The
shield icon has three main functions. It
shows the arming status of the system at
a glance. The shield's animated border will
be a solid blue when armed and the interior
will display the type of arming: all, perimeter,
home, sleep or away. Area mode also
supported. When disarmed the area will be
transparent with the exception of an outline
of the shield. The shield allows for quick
arming, so the user can press and hold the
shield down for 2 seconds and the system
quick arms Away and begins the exit delay.
The shield also provides a link to standard
arming and disarming options.
When the panel is programmed in Home/
Sleep/Away, the user will first tap on the
interactive shield to display arming options.
When arming, the exit timer provides a
countdown for the programmed amount of
time the user has to exit. The timer provides
both a visual and audible notification to exit.
Touchpad conTrol
The end user can choose to have an audio
confirmation tone each time a screen touch
occurs.
LED indicators (Blue and Red) indicate power
and armed/disarmed status, including
condition of the battery.
red Keypad
During an alarm state, the shield on main
screen turns Red. The change in color allows
the user to instantly recognize an alarm
condition, even if the siren has silenced. The
shield remains red until reset by the user.
carousel menu
The carousel menu on the main screen
offers common functions such as panic,
chime, check-in, user menu, fire reset,
options, and easy exit™. Panic keys are part
of the carousel menu, once pressed, three
icons will appear for PANIC, EMERGENCY,
and FIRE. Easy Exit is only available while
the system is armed. Traditional DMP
shortcut keys will also work in the keypad
screen.
aTTenTion lisT
After disarming, if an alarm on any zone
or communication problem has occured
while armed, the Main Screen may display
a yellow attention list icon at the top of the
screen. When touched, the attention list
displays listing the zone and event.
weaTher inFormaTion
Up-to-date weather information for today
and tomorrow will be displayed on the
bottom left of touchscreens that are installed
with Cell or Network connected panels.
Network connected panels will also display
the current temperature. If the panel
is not capable or supporting weather,
the space will be blank. Eight icons are
available to indicate the weather: SUNNY,
CLEAR, P-CLOUDY, CLOUDY, RAINY, SNOWY,
STORMY, and FOGGY.
VersaTile superVised and
unsuperVised operaTion
When programmed for supervised operation,
the keypad occupies its own unique device
address on the keypad data bus.
Unsupervised operation allows you to
install an unlimited number of keypads
set to the same device address. Increasing
the number of keypads allows maximum
system operating flexibility.
“is This a False alarm?” and
cancel/VeriFy™
In a Home/Sleep/Away or All/Perimeter
system, you can CANCEL a burglary alarm
or VERIFY that a valid burglar alarm has
occurred or similarly answer whether it
is a false alarm with YES or NO. Selecting
VERIFY or YES manually verifies that
an alarm occurred and sends an alarm
verification message to the central station.
uniVersal proGramminG
Tool
The 7800 can be used for system installation
and programming.
Four expansion Zones
Zone expansion is available right on the
keypad where you need it the most. The
four expansion zones on the 7872 and 7873
models are fully programmable Class B
protection zones that can be used for a
variety of residential fire, burglary, and
access control applications.
Z-waVe™ supporT
Add up to 232 Z-Wave devices with the 738Z
module on the XT and XR150 | XR350 | XR550
Series Panels. Control your lights, locks, and
thermostats all from the Carousel menu on
the Graphic Touchscreen Keypad. Create
Favorites to program multiple devices to
respond to a single command or panel event
like arming and disarming.
Red Graphics screen during alarm
Z-Wave Thermostat Screen
