DMP Electronics 3300MX 3300MX-M 3300MX-H 3300MX-C 3300MX-C22 3300MX-C85, User Manual

Page: 25 / 38

EBOX-33xxMX Series User Manual
DMP Electronics Inc 18
Model Type EBOX-3310MX-L3U4 EB-3310MX-L3U4AP
Processor Vor (933MHz)
Memory Onboard 1GB DDR2
VGA Integrated Graphics Chip / D-Sub 15-pin
Ethernet
10/100 Mbps LAN x 3 (RJ-45)
LAN 2, LAN 3 Realtek RTL8100B
LAN 1 from CPU support Built-in PXE diskless boot function
USB External: 4 ports (2 at the front; 2 at the rear)
Audio Mic in and Line out
MIO
SD Slot 1x
SATA (Note 2) 1x
PS2 N/A
Serial
RS-232 1x
RS-422 N/A
RS-485 N/A
Power DC +8V ~ +15V
Dimensions 115 x 115 x 35mm
Weight 500g
Operation Temp.
5 ~ 50
℃
Note:
1. 1GB DDR2 version called 3310MX series.
2
. 2.5” Internal SATA HDD / SATA DOM support.
3. On EBOX-33xxMX or 33xxMX-
C COM3 and COM4 have “TXD” and “RXD” signals only, not support
to use “Flow Control” on EBOX-3300MX’s COM3 and COM4.
33xxMX/ AP, 33xxMX-C/ CAP, 33xxMX-T, 33xxMX-TC, 33xxMX-JSK COM
ports x 3 how to use:
The second COM port use Y cable became COM ports x 2 + COM1 port = total COM ports x 3
COM2 Connector defines as COM3 and COM4, to use two COM ports:
33xxMX = RS-232 x 3 (8pin)
COM 1 = Full 9pin RS-232
COM 2 Connector (COM 3, COM 4) = RS232 x 2 ( Support TX & RX signals only)
If user second device
connecting on COM2 don’t need to use the standard 9pin COM port, then, TX RX
possible can be used to do the send and receive functions but not the flow control.
If user needs to use more than one complete full 9 pin RS-232 COM port, please choose the model type
EBOX-3310MX-TS4C series.