®
2007
voltage (Ui) should be 5-27V DC, and the maximum input current (Iimax) should be
27mA DC. To connect the impulse output, connect 5-27V DC to connector 9 (anode),
and the signal wire (S) to connector 8 (cathode).
1.10 Troubleshooting
CAUTION
•
During reparation and maintenance, do not touch the meters connecting
clamps directly with your bare hands, with metal, blank wire or other
material as you will have the chance of an electricity shock and a possible
chance for health damage.
•
Turn off and lock out all power supplying the energy meter and the
equipment to which it is installed before opening the protection cover to
prevent the hazard of an electric shock.
WARNING
•
Maintenance or reparation should be performed by qualified personnel
familiar with applicable codes and regulations.
•
Use insulated tools to maintain or repair the meter.
•
Make sure the protection cover is in place after maintenance or reparation.
