15
2.6) - ADVANCED FEATURES
2.6.1) - Automatic site ID message (§ 4.1.6 of EN 81-28 norm)
Automatic ID Message
Enabled.
If enabled (§ 3.2.14), device will automaticaly generate the Address message (§ 3.2.6) synthesizing
telephone's ID number (§ 3.2.8).
2.6.2) - Call closing recognition (§ 4.1.2 of EN 81-28 norm)
2.6.3) - Multiline mode
2.6.4) - Automatic double language messages
Automatic call closed recognition
Enabled !
If enabled (§ 3.2.18),telephone will try to automatically understand if the operator hanged handset
without pressing '8'.The event is based on the recognition of busy tone coming from the line and may not
work well in every country.
Unit ID in multiline configuration
1-Master, 2 ... 9
If many telephones are to be installed on the same line (up to 9), every device can be tagged with a unit
identifier that can be used by the remote operator to select the one he want's to talk with.
Selection is needed when operator calls the telephone on the lift and is performed by just selecting the
Unit ID on his keypad.
There must be a telephone with ID 1; all ID's must be different.
Double Language Messages
Italiano, English, ...
You can configure Amigo2 to automatically play car messages in two languages.
§ 2.5.2 - § 3.2.23
§ 3.2.22
2.6.5) - Audio messages playback controll
Audio Messages playback
Playback Enabled
You can choose whether Amigo2 must play audio messages or not during the call cycle. Option "Only in
CAR" enables car messages playback only (user messages):
- Courtesy Car Message
- End Alarm Message
- Technical test Message
- Alarm filter Message
§ 3.2.21
Summary of Contents for Amigo II ETSA2MRA
Page 23: ......
