12
PNEG-258
Scattergrain Grain Spreader
4. Installation
Grain Spreader Installation
1. Adjust hanger extensions to fit roof opening and install the power spread unit.
2. Use the 9/32" hole at the end of each hanger extension and bolt hanger extensions to hatch collar.
3. Tighten all bolts holding hanger extensions.
4. Once unit is installed, use a carpenter’s level across the top of the spreader cone to confirm it is level
in all directions.
(See Figure 4A.)
Figure 4A Mount Spreader and Check with Level
5. If the unit is not level, add spacer washers between hanger brackets and hanger extensions to level
unit.
(See Figure 4B.)
Figure 4B Use Washers to Level Unit