OWNER’S MANUAL
2015
MASTERFOX 125cc
28
Do
not
transport your Masterfox on its side. This can damage the Masterfox and leaking gasoline
or oil can create hazardous conditions.
Storing Your Masterfox
If you won’t be riding your Masterfox for an extended period, such as during the winter, thoroughly inspect
your Masterfox and correct any problems before storing it. That way, needed repairs won’t be forgotten,
and it will be easier to put your Masterfox back in service come riding season.
We suggest you perform the following procedures to keep your Masterfox in top condition. These storage
procedures will reduce the deterioration that can occur during storage.
Preparation for Storage:
Change the engine oil.
Be absolutely certain that the fuel petcock is in the “OFF” position.
Drain the carburetor into an approved gasoline container and dispose of it in an approved manner
or pour into the fuel tank.
Fill the fuel tank and make certain that the cap is properly fitted and completely closed. If the
Masterfox is going to be stored for more than one month, drain the carburetor. This will help
assure the Masterfox performs well when it’s time to ride again.
Wash and dry your Masterfox.
Lubricate the drive chain.
Inflate the tires to the recommended air pressure.
Store your Masterfox in an unheated area, free of dampness, away from sunlight, with a minimum
of temperature variation.
Cover your Masterfox with a porous material. Avoid using plastic or similar non-breathable, or
coated materials that restrict air flow and allow heat and moisture to accumulate.
Removal from Storage
Uncover and clean your Masterfox.
If your Masterfox has been stored for more than four months, change the engine oil.
If your Masterfox has been stored for more than two months, drain and replace the fuel.
Lubricate the drive chain.
Check tire inflation and add air, if needed, to return inflation to specifications.
Perform a pre-ride inspection, then test-ride your Masterfox at low speeds.
