DM Bath DMV2401 Installation Manual Download Page 7

To maintain the finish of your cabinet and countertop, use a clean soft cloth, lukewarm water and non-abrasive detergent. 
To avoid deterioration it is important to keep surfaces dry of any moisture. Avoid exposure to chemicals, solvents, acids 
and abrasive agents. Avoid contact with household chemical substances, such as toothpaste, mouthwash, lipstick, per-
fumes etc. Should your surface be exposed to any of these damaging products by accident, clean immediately with soft 
cloth and lukewarm soapy water. Avoid use of highly aggressive cleaning agents, abrasive powder or cream. When using 
professional cleaning products, follow the manufacturer’s instruction carefully and always test your cleaning solution on a 
small-unexposed area before applying to the entire surface.

Cleaning Difficult Stains on Quartz Countertop

Avoid exposure to any strong chemicals and solvents on your quartz countertop.  You should first try removing stain with:

For the purpose of spot cleaning difficult stains a solvent like acetone can be acceptable. It should ONLY be used for 
short-term exposure at 50% dilution based on removing and rinsing applied area immediately after.

Care & Maintenance 

Limited Warranty 

DM Bath products (Bathroom vanities, mirrors, countertop, side/backsplash & sinks) carry a

 

2-year 

limited warranty free from defects in material and workmanship for residential installations only. 

 

This commences on the date of product shipment to the dealer or, if shipped direct, on the date of shipment to the 
customer. If such a defect appears during the terms of this warranty, manufacturer will, at its own discretion repair, replace 
the defective part(s) or the defective product, with the same or existing product of similar value, free of charge, excluding 
installation and destination shipping costs.

• 

This warranty applies only to the original purchaser for the products that are subject to residential installation 

only. This warranty is void if the product has been moved from its initial place of installation or has been used 

for commercial, industrial or other non-residential use.

• 

Warranted item must have been purchased only from an authorized Dezign Market dealer, carrying DM BATH 

products. A copy of the original purchase receipt is required for validation.

• 

Customer assumes responsibility for all merchandise recieved in original condition upon delivery. 

• 

All defects must be reported as soon as possible, prior to install, not exceeding three (3) business days from 

date of delivery. Failure to do so will result in denial of claim. No damage claims will be accepted after that. 

• 

It is the customer’s responsibility to investigate all end user complaints regarding Dezign Market products. To 

make a claim for a defective product, please have a digital photo taken of the defective product, please have a 

digital photo taken of the defect and send it via email to [email protected] with detailed description. 

• 

This warranty excludes the coverage of any costs incurred in the removal, re-installation and shipment of the 

replacement product or the replacement parts, or any consequential damages.

• 

This warranty does not protect against malfunction or other failure caused by accidents, alterations, abuse, 

neglect or misuse including, but not limited to: improper handling or storage conditions; damage during 

installation; faulty maintenance, harsh detergents or abrasive cleaners; damage caused by fire, water, radical 

temperature fluctuations or inadequate air circulation at the place of installation; repairs or modifications of any 

kind, including painting, by persons not authorized by the manufacturer; or use for purposes other than intend-

ed or in locations subject to conditions not intended for the product(s).

• 

Normal wear and tear is not considered defect and not covered under warranty, including minor scratches or 

chipped counters.

• 

This warranty does not apply to local building or plumbing code compliance. It is the consumer’s responsibility 

to determine local code compliance prior to purchase and installation.

• 

This warranty is in lieu of all other warranties, expressed or implied, and the only one recognized by the manu-

facturer.

• 

To prolong the lifetime of DM BATH product(s), the recommended manufacturer’s installation and maintenance 

procedures must be strictly followed.

• 

Dezign Market shall make the final determination on any issue or uncertainty regarding the application of this 

warranty. 

If the above limits and conditions are not met, the warranty will be null and void. 

6

• 

A regular eraser.

• 

Mild liquid soap and water solution.

• 

A natural stone/quartz over-the-counter cleaning solution by buffing with a soft cloth or Mr. Clean magic eraser 
sponge. 

Summary of Contents for DMV2401









Reviews: