Undermount Sink & Countertop Installation
01.
02.
03.
04.
05.
06.
07.
Read lifting pre-caution above. Remove the
countertop from the box while maintaining its
vertical position. Carefully turn the counter top
over, resting it on a soft, stable surface to prevent
damage.
Position the undermount sink over the sink cutout on
the counter top. Make sure the sink is centered with
the faucet hole and is evenly spaced. Draw an outline
of the sink with pencil on the countertop.
Generously apply 100% silicone sealant around the
rim of the undermount sink.
Position and hold the sink at the opening ensuring
to follow your outline. Immediately wipe away any
excess sealant. Let dry for 24 hours.
Carefully turn the countertop and sink over. Place the
top on the vanity while maintaining a vertical position.
Gently place the edge of top at the back of the
cabinet making sure aligned. Lower top to cabinet
make sure both ends come down at the same rate.
60" single
60" single
60"
60" single
If you have a DM Bath back/side splash, install next.
Apply 100% silicone sealant on the backside.
Vertically align back/side splash making sure it is
aligned to countertop. Press into place. Immediately
wipe away excess sealant. Let dry for 24 hours.
Complete the faucet and drain installation according
to Manufacturer’s Installation guide.
5