20
21
Enables you to remotely reboot the system through the web GUI.
To reboot the enclosure click the Reboot button.
You will receive a message alerting you that all open connections will be reset, click the OK
button if you would like to continue.
The enclosure will reboot.
You will receive a message alerting you that all open connections will be reset, click the OK
button if you would like to continue.
The enclosure will reboot.
Note:
It may take several seconds for the system to fully reboot. If you have changed the IP
address of the enclosure or if the enclosure is set to automatically obtain an IP, you
may have to update the address bar to regain access to the enclosure’s web
configurations.
Note:
It order to turn the enclosure make on, it must be done manually using the front
power button.
Enables you to remotely turn off the enclosure through the web GUI.
To power off the enclosure click the Shutdown button.
Enables you to restore the enclosure to its default settings (reset) through the web GUI.
To restore default settings click the Reset button.
You will receive a message alerting you that all default settings will be restored, and
advising you not to turn off the enclosure power, or close your web browser during the
Reset process, click the OK button if you would like to continue.
The default settings will now be restored.
SMB enables you to browse the folders and file on the enclosure access across
your
network.
System Manage - Reboot
System Manage - Default
App Server-SMB
System Manage - Shutdown
OK
Cancel
This will restore device’s default setting.
Please don’t off the power and close the web
browser when the system is changing the settings.
Are you sure?
The page at 192.168.100.47 says:
x
