Calculate your own enclosure
Box volumes:
When calculating the inner volume of an enclosure you just multiply the
width (W) x height (H) x depth (D).
Use measures in dm and you will get the answer in liters.
A trapezoid box is calulated as this:
Vol=width (W) x height (H) x upper depth (UD) + lower depth (LD)
2
Be sure to measure the
inside dimensions.
W
H
UD
LD
Technical specifications for DLS Reference RW10i & RW12i
RW10i
RW12i
Size
25 cm (10")
30 cm (12")
Impedance
2 ohm
2 ohm
Nom. power (RMS)
250 W (max 500)
250 W (max 500)
Freq. range
25 Hz - 2 kHz
20 Hz - 2 kHz
Sensitivity
86,2 dB
87,6 dB
Voice coil diameter
50 mm (2”)
50 mm (2”)
Re
1,8 ohm
1,8 ohm
Voice coil inductance, 1 kHz
0,86 mH
0,86 mH
BL product
7,8
9,1
X-max
+-9 mm (0,35”)
+-9 mm (0,35”)
Suspension compliance CMS
346
248
SD- Effective piston area
346 cm
2
511 cm
2
Resonant freq. (Fs)
26,8 Hz
26,1 Hz
Vas (liters)
63,3
99,6
Vas (ft
3
)
2,23
3,52
Qms
3,95
4,4
Qes
0,46
0,48
Qts
0,42
0,44
Cone material
Polypropylene
Polypropylene
Magnet weight
47 oz
55 oz
Magnet diameter
5,9" (150 mm)
5,9" (150 mm)
Installation depth
5,9" (150 mm)
6,5" (165 mm)
Mounting hole
9,45" (240 mm)
11" (280 mm)
Outer diameter
10,82" (275 mm)
12,6" (320 mm)
Weigth
9,9 lb (4,5 kg)
12,1 lb (5,5 kg)
SEALED
Sealed enclosure:
Wiring
: 2 ohm
Volume
: 20 / 0,70 (litre / ft
3
)
Damping
: Acoustic wool
F3
: 53 Hz
Outside box dimensions:
Width
: 450 mm (17,7”)
Height
: 340 mm (13,4”)
Lower depth
: 245 mm (9,64”)
Upper depth
: 145 mm (5,7”)
Material
: MDF 19 mm (3/4”)
Recommended enclosure RW10i
Recommended enclosure RW12i
Sealed enclosure:
Wiring
: 2 ohm
Volume
: 30 / 1,06 (litre / ft
3
)
Damping
: Acoustic wool
F3
: 50 Hz
Outside box dimensions:
Width
: 520 mm (20,47”)
Height
: 360 mm (14,2”)
Lower depth
: 281 mm (11,1”)
Upper depth
: 181 mm (7,1”)
Material
: MDF 19 mm (3/4”)
Technical drawing for a 20 litre enclosure.
The RW10i works well in a 20 litre sealed enclosure.
This is a drawing for the 20 litre box and the separate boards
needed to build a suitable enclosure.
SEALED
Technical drawing for a 30 litre enclosure.
The RW12i works well in a 30 litre sealed enclosure.
This is a drawing for the 30 litre box and the separate boards
needed to build a suitable enclosure.
112
201
206
112
245
148
242
237
281
148
