DLP Projector—User’s Manual
—
24
—
O
N
-S
CREEN
D
ISPLAY
(OSD)
M
ENU
S
ETTINGS
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control cursor buttons or the buttons on the projector to navigate and make
changes to the OSD. The following illustration shows the corresponding buttons on the projector.
1. To enter the OSD, press the
MENU
button.
2. There are three menus. Press the cursor
◄ / ► buttons to move through the
menus.
3. Press the cursor
/
▼ buttons to move
up and down in a menu.
4.
Press the cursor ◄ / ► buttons to change
values for settings.
5. Press the
MENU
button to close the OSD
or leave a submenu. Press the
EXIT
button to return to the previous menu.
Note:
Depending on the video source, not all items in the OSD are available. For example, the
Horizontal/Vertical Position items in the Computer menu can only be modified when connected
to a PC. Items that are not available cannot be accessed and are grayed out.
