//,0)%304-00$7
FB0F00FB0
The
DPL Swimming Pool Heat Pump
is designed for easy operation. The side panel contains a digital temperature
control readout. The Heat Pump is set to reach and then maintain the selected pool water temperature, as long as the pool
pump is running.
To start the unit:
> Press the button. In normal operating mode, the display indicates the water temperature in centigrade degrees.
To stop the heat pump, press the button again.
To adjust the temperature to the desired value:
> Press the button until the red pilot light turns on.
> To adjust the water temperature, press the or buttons until the targeted temperature is displayed.
The available temperature range is between 18 °C and 35 °C.
> To return to normal operating mode, press the button again, for at least 5 seconds.
The pilot light turns on whenever the heat pump is in operation, which means that the ventilator(s) and the compressor
are functioning in order to heat the pool.
All models use a 5-minute time delay to prevent repeated tripping of the compressor's overload protection mechanism, which is
caused by attempting startup before system pressures are equalized. Any interruption will result in a 5-minute time delay.
The pilot light will blink during this 5-minute time delay.
To display the temperature in farenheit (°F) or celcius (°C), Press the and buttons simultaneously
for 3 seconds to select the desired temperature scale.
Warning:
Prior to starting the heat pump, you must ensure that:
> There is electricity supplied to the heat pump.
> The filter pump is operating with a minimum water circulation of 6 m
3
/h.
If these two conditions are not met, the heat pump will not start. In such a case, the digital display thermometer will be un-
usable.
TIP:
Setting the thermostat to its highest setting will not heat the water faster than setting it at the desired temperature.
A:
pilot light
B:
pilot light
C:
Digital display
D:
Button to set temperature at desired value
E:
Start/stop button
F:
Temperature adjustment buttons
A
B
D
C
E
F
C/-&%0()0'%,/10),7'31+'%00%1%00+2'+.%20$78
EBBB0EF0EFBF0EF0B0CCB0EF0DB
9
6
10
2
11
12
14
33
22
21
23
24
48
47
46
58
25
26
32
30
29
28
15
16
27
8
1
34
35
5
7
31
20
19
18
17
4
13
3
50
51
52
53
54
57
80HPRA-E-410 - 100HPRA-E-410
3P
H
V
entilador
V
entilador
Pr
otección
de fase
Pr
otector
de pr
esión alta
Pr
otector
de pr
esión baja
Pr
otector de
pr
esión de agua
Sensor ambiental
Sensor de
temperatura del agua
Sensor de
descongelamiento
Compressor
Transformador
Relé
Válvula de
inversión
Pr
otector
de fase
Calentador
del Cárter
Relé
Relé
380 415 V
oltios 50 Her
cios 3PH
Summary of Contents for 100 HPRA-E-410
Page 2: ......
