—
30
—
S
elect “Turn Windows features on or off” to open
Have “Telnet Client” option checked, then press “OK” button.
Specsheet for “RS232 by TELNET” :
1.
Telnet: TCP
2.
Telnet port: 23
(for more detail, kindly please get contact with the service agent or team)
3.
Telnet
utility: Windows “TELNET.exe” (console mode)
4.
Disconnection for RS232-by-Telnet control normally: Close Windows Telnet utility directly after
TELNET connection ready
5.
Limitation 1 for Telnet-Control: there is less than 50 bytes for successive network payload for Telnet-
Control application.
Limitation 2 for Telnet-Control: there is less than 26 bytes for one complete RS232 command for
Telnet-Control.
Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be more than 200
(ms).
(*, In Windows built-
in “TELNET.exe” utility, “Enter” key pressed will have “Carriage-Return” and
“New-Line” code.)
