RESET SETTINGS
Reset Settings
allows you to revert back to the factory settings. To do so, press
the dial when on
Reset Settings
. TransDock micro will ask you if you are sure
you would like to reset your settings. Press the dial once to accept, or turn right
or left to return to the
Settings Menu
.
Getting the Best Sound Quality with TransDock micro
• Use IntelliTune to automatically find the optimal frequency to broadcast
your iPhone over your car’s FM stereo. Then, tune your car’s FM stereo to
the frequency displayed on TransDock micro.
• Choosing between
Mono
and
Stereo
in
Listening Mode
:
Mono
allows for
much better transmitter performance, while
Stereo
allows for the best
sonic musical performance.
NOTE:
If static or distortion increases, switch to
Mono
for the best transmitter
performance possible.
• To get the best initial performance from TransDock micro, it is very important
that you set your iPhone EQ to Off and adjust your car’s bass and treble
controls to 0. Then you can experiment with adding bass and treble to your
desired level.
| 13
AUDIO LEVEL
Audio Level
gives you the option of selecting the volume output level that fits
your particular audio. Turn the dial right or left to select from:
Low
,
Medium
or
High
.
LISTENING MODE
Listening Mode
allows you to choose between
Mono
and
Stereo
. TransDock
micro defaults to
Mono
for optimal transmitter performance. To learn more
about
Listening Mode
please read
Getting the Best Sound Quality with
TransDock micro [pg. 13]
.
BRIGHTNESS
TIME
Brightness Time
allows you to change the length of time that the TransDock
micro’s display screen stays active. Scroll through to select:
Always On
,
2 seconds
,
5 seconds
,
10 seconds
,
15 seconds
, or
20 seconds
BRIGHTNESS LEVEL
Brightness Level
controls the brightness of the OLED display while TransDock
micro is active. Turn the dial right for higher intensity and left for lower intensity.
DIM LEVEL
Dim Level
controls the brightness of the OLED display while TransDock micro
is inactive. Turn the dial right for higher intensity and left for lower intensity or
completely off.
12 |
DLO TRANSDOCK MICRO USER GUIDE
