DLI 9000 Product Manual
Rev. 3
33
SAM Card Installation
Part of the DLI 5-in-1 Module option is an RFID Reader that requires a SAM Card to function
correctly. The SAM Card slot is found on the back of the 5-in-1 Module and has special
instructions for installation.
Warning! Do not install/remove module while unit is powered on
or plugged in to AC.
1. Power down your DLI 9000 properly and remove AC (if plugged in).
2. Remove the 4 screws holding the 5-in-1 Module to the unit.
3. On the back of the 5-in-1 there is a SAM Card slot cover. Remove the one screw holding
that on and follow the instructions on the SAM Card clip.
4. Be sure to place the slot cover back and screw down. Next, line up the 5-in-1 Module on
the back of the DLI 9000 and screw the device back down. DO NOT over tighten.
If you have any questions please contact our Support.
Summary of Contents for 9000
Page 1: ...Rev 3 ...
