DLI 9000 Product Manual
Rev. 3
30
Pin Pad
Select MSR in the drop down menu. Then select USSEN_USN3170_RS232_1.
Tap Open, Claim and Enable in that order. Status should display successfully for all
three. Next select DirectIO>Pin>Get Pin. You can now type in your PIN number using
the Pin Pad (example shown below is 1234) and press ENTER (green button). Your PIN
number will display
in the “Status” section.
To close the Pin Pad, select Disable, Release and Close in that order. Status should
display successfully for all three.
(Continued on next page)
Pin Pad is part of the optional 5-in-1 Module located on the back of the unit.
Summary of Contents for 9000
Page 1: ...Rev 3 ...
