7.4 Accessory Items
UL 325 Monitored Entrapment Protection Devices available for the model 6524 swing gate operator.
Type B2 Contact Sensors (Reversing Edge)
Miller Edge Sensing Edges - all models with a T2 (resistive) termination.
Miller Edge Monitored Gate Link Model MGL-K20
Type B1 Non-contact Sensors (Photo Cell)
Miller Edge Reflective-Guard Model RG
Miller Edge Prime-Guard Model PG
EMX Industries Model IRB-MON
EMX Industries Model IRB-RET
Omron Model E3K-R10K4
Seco-Larm Model E-931-S50RRGQ
Seco-Larm Model E-931-S33RRGQ
Seco-Larm Model E-960-D90GQ
Type B1 Non-contact Sensors (Photo Cell) requires DK P/N 9200-190 Photocell Resistor kit
MMTC Model IR55
MMTC Model 60-278
Carlo Gavazzi Model PMP12
Carlo Gavazzi Model 8080-031
Monitored Expansion Kit
Miller Edge Multi-Input Module Model MIM-62
Accessory items available for the model 6524 swing gate operator.
Contact Sensors
- For use as a safety protection device. Miller Edge, Inc., MGO20, MGR20, MGS20
Photo Cell
- Non-contact (photo-cells) sensors for use as a safety protection device.
MMTC, Inc. Model IR55
P/N 8080-010
Allen Bradley
P/N 8080-011
Carlo Gavazzi Type PMP12
P/N 8080-030
Carlo Gavazzi Type PMT
P/N 8080-031
Magnetic Lock
- Magnetic Gate Lock Kit provides an excellent means to secure swing gates and is a fail-safe device allowing
emergency vehicle access upon power outage. P/N 1216-080 and P/N 1216-081
Interconnection Cable
- Interconnect wire cable contains all the necessary wires to interconnect primary / secondary operators.
Cable length 30 feet. P/N 2600-755
Cable length 40 feet. P/N 2600-756
Cable length 50 feet. P/N 2600-757
Time Clock
- 7 day and 365 day time clocks can be used to automatically open gate at pre-set time and days. Compact clock fits
inside the operator.
P/N 2600-791 - 7 day clock
P/N 2600-795 - 365 day clock
Uphill Arm Pivot Assembly
- Ball joint pivot gate connection used on uphill or downhill opening swing gates. P/N 6500-490
Torsion Rods
- Torsion rod assembly is used on uphill swing gates for counter balance. P/N 1203-084
Hinges
- Heavy-duty ball bearing hinges provide easy swing gate operation. P/N 1200-009, P/N 1200-019, P/N 1200-039.
Surge Devices
- High and low voltage surge suppressors help prevent circuit board failure caused by lightning strikes and
power surges.
P/N 1879-010 - High Voltage
P/N 1878-010 - Low Voltage
Speed Bumps
- Prefabricated six-foot speed bump reduces traffic speed through gate system. P/N 1610-150
12 Volt 18 Amp/Hr Extended Battery
- P/N 1801-004. Two (2) required.
24 VDC Solar Power Kit
- P/N 2000-070.
Low Current Draw External Loop Detector
- Detectors are solar friendly and mount into solar control box.
Single channel detector - P/N 9402-050
Plug-In Low Current Draw Loop Detector
- Detectors plug directly into ports on circuit board simplifying wiring. Can be used
with solar powered operators.
P/N 9416-010 - Single channel detector
P/N 9415-010 – Two-channel detector
6524-066-G-7-16
3
5
