DKS 1000-080, Owner'S Manual

Page: 11 / 17

From
Inverter
115 VAC
Input
115 VAC Output
To Gate Operator
System 1
To
Inverter
To
Inverter
Hot
Neutral
Ground
Hot
Neutral
Ground
2 1 4 3 6 5 8 7 10 9
Gate Operator
Open Terminals
INPUT
AC
POWER
OUTPUT
AC
POWER
Insure that both AC Power Input and AC Power Output switches are in the OFF (down) position before connecting any wires.
2
1000 Watt inverters (1000-080) can use one (1) or two (2) batteries; 1500 Watt inverters (1000-081) use two (2) batteries.
1
1
2
J8
J6
J1
3
4
Insure that J1 IS NOT plugged into the circuit board. This plug is inserted only after the batteries are connected.
3
Insure J6 and J8 ARE inserted into the circuit board before connecting batteries.
4
4
1
1
2
2
Connect 115V Output to gate operator AC input terminals. Connect relay 1 (Term 7 & 8) to
gate operator 1 open terminals; relay 2 (Term 9 & 10) to gate operator 2 open terminals.
Connect 115 VAC source voltage to AC input
terminals.
Connect RED wire from J1 to POSITIVE terminal on battery. Connect BLACK wire from J1 to
NEGATIVE terminal on battery.
Be sure that J1 IS NOT plugged into the board at this time !
3
4
4
If using two batteries, connect batteries in PARALLEL: Positive to Positive; Negative to
Negative.
DO NOT CONNECT BATTERY TO INVERTER AT THIS TIME.
5
5
Connect battery to inverter terminals: Positive to RED terminal; Negative to
BLACK terminal.
Insure that J1 IS NOT plugged into the circuit board .
6
6
Insure all wiring is connected to the circuit board and inverter, and that
the battery is connected to the inverter. Plug J1 into the circuit board.
DOORKING, INC., INGLEWOOD, CA 90301
Date: Dwg. No. Rev.
Title:
4/09
A
M1000-Wire
1000 Inverter
Wire Connections
J3
J2
J4
115 VAC Output
To Gate Operator
System 2
Gate Operator
Open Terminals
3
1
1000-065-B-7-09 Page 11