DKC SMALLR1, User Manual, Page: 125 / 147

123
LCD display Description
Output
：
Display the output voltage and output frequency of
the UPS. As the following graphic shows, the output voltage is
220V, the output frequency is 50Hz.
Load: Display the numerical value of the active power (WATT)
and apparent power (VA) of the load. For example, as the
following graphics shows, the WATT of the load is 800W, VA is
1.0KVA (when disconnect loads, it is a normal phenomenon to
show a small numerical value of WATT and VA).
Software version and Temperature: Indicate firmware
version of UPS and display the highest temperature of UPS
components; As the following graphics shows, the firmware
version is v1.7, the maximum temperature is 40
℃ .
Input: Display the voltage and frequency of the input. As the
following graphics shows, the input voltage is 220V, input
frequency is 50Hz.
Battery: Display the voltage and capacity of the battery. As the
following graphics shows, the battery voltage is 24V, the
capacity of battery is 100% (the capacity of battery is
approximately reckoned according to the battery voltage).
Warning: Display the warning code.
Table 11. Parameters inquiring on the display of the UPS