background image

PRE-SEASON VEHICLE MAINTENANCE

z

Have all scheduled vehicle maintenance performed as recommended by the

manufacturer.

z

In 

addition to generally keeping equipment in order, ensure specifically that:

1.  Windshield wipers, heaters, and lights are working correctly
2.

 Emergency flasher lights are engaged to increase visibility and safety.

3.  Your vehicle is equipped with chains when necessary.
4.  The operator uses protective clothing and rubber gloves when handling

caustic snow-melting chemicals.

WARRANTY

LIMITED ONE (1) YEAR WARRANTY
WHAT IS COVERED

DK2 Inc. warrants to the original purchaser of a Detail K2 Snow Plow that the 

product will be free and clear of manufacturing defects in workmanship and 

materials under normal use and service for a period of one (1) year from the date 

of the original purchase.  

If within one (1) year from the original date of purchase this product fails due to 

defect in material or workmanship, Detail K2 will repair, replace, or supply any 

defective part at our option. Upon expiry of one (1) year, Detail K2 will have no 

further liability related to the snow plow.

Detail K2 does not authorize any party, including its authorized distributors or 

dealers, to offer any other warranty on behalf of Detail K2 Inc.

THIS WARRANTY DOES NOT COVER OR APPLY TO:

a.

Damage to the product due to misuse, mishandling and abuse

b.

Improper installation, maintenance and storage

c.

Expendable parts such as nuts and bolts, pins and springs

d.

Normal wear and tear

e.

Consequential damage and incidental damages such as damage to persons or

property

This Detail K2 Snow Plow is intended for personal use only.  It is not intended for 

commercial use and subsequent use in this capacity will void all warranty claims.

PROCEDURE FOR OBTAINING A RETURN AUTHORIZATION

Within the one (1) year warranty period, the purchaser of the snow plow must 

notify an authorized distributor or dealer of the claimed defect and provide proof 

of original purchase.  At this time the validity of the claim will be determined and a 

Return Goods Authorization Number (RGA) will be issued if approved.  No returned 

product will be accepted under warranty unless accompanied by an RGA# issued 

by Detail K2 Inc.

RESOLUTION FOR A DEFECTIVE SNOW PLOW

Detail K2 Inc. will at its option repair or replace the defective snow plow or snow 

plow parts covered by this warranty.  The repaired snow plow or snow plow parts 

will be shipped to the purchaser upon completion.  All transportation charges 

shall be the responsibility of the purchaser. Any damage in transit will be the 

responsibility of the carrier or at the risk of the purchaser.

Summary of Contents for RAMP8219






















Reviews: