DK2 Power OPG777, User Manual

Page: 9 / 56

v.220923 | 9
DANGER! GENERAL SAFETY: Failure to follow warnings, cautions, assembly and operation
instructions in the User Manual may result in serious injury or death.
DANGER! READ THE USER MANUAL BEFORE OPERATION
• Do not permit children to operate this equipment at any time. Do
not permit others that have not read and understood the complete
User Manual to operate this equipment.
• Keep all people and pets a minimum of 10 feet (3.04m) away from
the work area when operating this machine. Only the operator is
to be near the machine during use.
• Do not operate the machine when under the influence of alcohol, drugs, or medication.
• Do not allow a person who is tired or otherwise impaired or not completely alert to
operate this machine.
DANGER! WORK AREA
• Do not operate the machine on icy, wet, muddy or otherwise slippery ground. ONLY
operate your machine on level ground. Operating on a slope could cause the machine
to roll over, which could result in injury.
• Do not operate the stump grinder in an enclosed area. Exhaust fumes from the engine
contain carbon monoxide which can be harmful or deadly when inhaled.
• Do not move the machine over hilly or uneven terrain without a tow vehicle or adequate
help.
• Operate the stump grinder in daylight or under good artificial light.
• Keep the work area free of clutter to avoid potential tripping.
DANGER!
• Make sure the operator knows how to stop and disengage the
controls before operating.
• Do not place hands or feet near the cutting teeth during
operation. Serious injury or death could result.
• Do not straddle or step over the stump grinder during operation.
• Never leave the equipment unattended while the engine is
running. Shut off the engine even if you are leaving the stump
grinder for a short period of time.
• Avoid contact with the muffler and other hot areas of the engine
during operation or after running to prevent burns.
WARNING! REPAIR AND MAINTENANCE
• Do not operate the stump grinder when it is in poor mechanical condition or in need
of repair. Frequently check that all nuts, bolts, screws, and belts are safely in place and
operation-ready.
• Do not alter the stump grinder in any manner. Any alteration will void the warranty
and could cause the stump grinder to be unsafe to operate. Perform all recommended
maintenance procedures before using the stump grinder. Replace all damaged or worn
parts immediately.
• Do not tamper with the engine to run it at excessive speeds. The maximum engine
speed is preset by the manufacturer and is within safety limits. See KOHLER® Engine
ENGLISH