DK2 Power OPC525, User Manual, Page: 10 / 68

10 | OPC525(D) man.
or medication.
• Do not allow a person who is tired or otherwise impaired or not completely alert to
operate this machine.
DANGER! WORK AREA
• Do not operate the machine on icy, wet, muddy or otherwise slippery ground. ONLY
operate your machine on level ground. Operating on a slope could cause the machine
to roll over, which could result in injury.
• Do not operate the machine in an enclosed area. Exhaust fumes from
the engine contain carbon monoxide which can be harmful or deadly
when inhaled.
• Do not move the machine over hilly or uneven terrain without a tow
vehicle or adequate help.
• Use a tire chock or block on wheels to prevent movement of the machine while in
operation.
• Operate the machine in daylight or under good artificial light.
• Keep the work area free of clutter. Remove chipped wood from around the machine
frequently to avoid potential tripping.
DANGER!
• Make sure the operator knows how to stop and disengage the controls
before operating.
• Do not place hands or feet inside the machine during operation.
Serious injury or death could result.
• Do not straddle or step over the machine during operation.
• Do not move the machine while the engine is running
• Never leave the equipment unattended while the engine is running.
Shut off the engine even if you are leaving the machine for a short period
of time.
• Avoid contact with the muffler and other hot areas of the engine during
operation or after running to prevent burns.
WARNING! REPAIR AND MAINTENANCE
• Do not operate the machine when it is in poor mechanical condition or in need of
repair. Frequently check that all nuts, bolts, and screws are tight.
• Do not alter the machine in any manner. Any alteration will void the warranty and could
cause the machine to be unsafe to operate. Perform all recommended maintenance
procedures before using the machine. Replace all damaged or worn parts immediately.
• Do not tamper with the engine to run it at excessive speeds. The maximum engine
speed is preset by the manufacturer and is within safety limits. See KOHLER® Engine
manual for more information.
• Remove the spark plug wire before performing any service or repair on the machine.
• Replacement parts must meet manufacturer’s specifications.
ENGLISH