DK Digital DVP-800, Owner'S Manual

Page: 7 / 32

Cleaning a Disc
To clean a disc use a soft cloth without any cleaning agent, liquid or solvent.
Only wipe from the center hole towards the outer edge,
never in circular
movement.
Using the Remote Control Handset
1. The remote control uses a pre-installed NiMH type battery
(CR2025 3V). To prevent an anticipated discharge of the
battery, we’ve inserted an insulating strip. Please pull it out
prior to first operation.
Should the r/c start to work unreliably replace the battery with
a new one of the same type. Open the battery compartment.
Push the retention clip in the direction of arrow and pull out the
battery mounting.
2. Before you take out the empty battery, please memorise its
position. The “+” marking must show upwards, otherwise the
r/c will not work and may be damaged.
3. Please point the r/c towards the main unit when operating its buttons.
The r/c works properly in a distance below 6m and in an angle of up to 30° of the front of
the unit. No obstacles may stand in the way between r/c and infrared sensor.
Ø
Batteries should not be disposed by ordinary refuse disposal. Please lead
empty batteries towards appropriate collecting points. Never throw batteries
into fire.
Ø
If you won’t use the r/c for some time, please remove the battery from the compartment,
to prevent damage by leakage.
7