Radio operation
Ø
Move the function switch to the RADIO position. Select the desired frequency range
using the BAND switch.
Ø
For FM reception you need to pull out the telescope antenna on the rear side of the unit.
Turn the antenna to find the best antenna orientation.
For AM reception the device has a built-in antenna. If AM reception is noisy or distorted,
please turn the unit to find the best orientation.
Ø
Use the TUNING control to select the broadcasting stations. The frequency scale printed
on the top panel around the TUNING knob will help you to locate stations.
Ø
When receiving FM Stereo transmission, the FM ST indication is activated. For MONO
transmission or weak, noisy reception, put the BAND switch into FM position to improve
the sound quality.
Cassette operation
Do not use C-120 tapes or very cheap tapes. This may lead to malfunctioning and tape
spillage. Before inserting a tape please ensure that the tape reels run smoothly and that
there are no tape loops. Otherwise this might result in tape spillage.
The tapes are equipped with plastic clips which can be removed
to secure recordings against rerecording or erasing (see Fig.).
The resulting deepening may be covered with adhesive tape to
rerecord the tape.
ATTENTION!
When you have removed the erase protection, the record button will be locked and cannot
be pressed! These plastic clips are also removed in commercial music tapes.
Play Tapes
Ø
Put the function switch into the position TAPE - POWER OFF.
Ø
Press the button
. The cassette compartment opens, and you can insert a recorded
tape with tape opening
upwards
into the cover bracket. The full tape reel should be on
the right side.
Ø
Carefully close the cover by slighting pressing down the cover of the cassette
compartment. Press the play
button . The tape will be played.
Ø
If you want to interrupt the playback for a short time only, press the
button . If you
press this button again, the playback will continue.
Ø
You may discontinue the playback by pressing the
button.
Fast Forward and Rewind
You can run forward and rewind the stopped tape. Use the
button for fast forward and
the
button for fast rewind. When you have reached the desired tape position, press the
button to stop the process. Never use the fast forward or rewind functions during
playback. This may cause damage to the tape.
Record Tapes
Put a cassette into the compartment: The side to be recorded must be visible from the
outside. The full tape reel has to be on the right side. Any previous recordings will be
8
