DJPOWER
7
4.
4
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
4.
4
.1
Orientation
For safety reasons, we do not recommend mounting the product in any capacity. Operate the product
while it is on the ground only, and make sure there is adequate room for ventilation, configuration, and
maintenance.
4.
4
.2
Rigging
DJPOWER recommends using the following general guidelines when mounting this product.
•
Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
•
Make sure that the structure or surface onto which you are mounting the product can support the
produ
ct’s weight (see the Technical Specifications).
•
When mounting the product on the floor, make sure that the product and cables are away from
people and vehicles.
5
OPERATION
5.1
Preparing for Operation
•
After checking that all the parts are intact and complete, position the machine on flat.
•
Fill the consumable into feed port when power off.
•
Always connect the product to a grounded circuit. Before power on, make sure it is connected with
the rated voltage.
•
Turn on the machine, it will immediately start heating up.
5.2
On-device Control Panel
To access the control panel functions, use the four buttons located underneath the LCD display.
Button
Function
<MENU>
Switch menu pages to select a function
