©
2015 DJI. All Rights Reserved.
5
ZENMUSE H4-3D
User Manual
Accessories Pack – Spare Screws × 1
M2.5x6.3: Used to mount your camera to the gimbal.
M2.5x5: Used to secure the gimbal to the damping unit.
M3x8, M3x6.5: Used to secure the gimbal to the aircraft.
Accessories Pack – USB Video Output Module × 1
Connects to the USB port of your camera, for transmitting video.
Accessories Pack – Anti-interference Board × 1
Serves as the connecting board between the G8 port on
the gimbal and an 8-pin cable. This board is only available
with the H4-3D gimbal that does not come with a GCU unit
(namely, the H4-3D specifically designed for a Phantom 2).
You can mount the H4-3D gimbal onto other DJI aircraft by using the below accessories. You may
purchase the accessories according to your aircraft type.
Gimbal Controller Unit (GCU) × 1
Connect the Gimbal Controller Unit to your flight control
system using CAN-Bus. Power the GCU and gimbal through
a 3S~6S power cable.
Gimbal Video Signal Cable × 1
For connecting the gimbal controller unit to your wireless
video transmission module. Transmits the video signal.
CAN-Bus Cable × 1
Use CAN-Bus to connect the GCU to your flight control
system.
8-Pin Cable × 1
For connecting your Phantom 2 to the G8 port of the GCU.
Phantom 2 (old version) Adapter
For installing the H4-3D gimbal onto older versions of the
Phantom 2.
In The Box
