Installing WB37 Battery
1. Install the back plate which is compatible WB37 battery to the back of the video
transmitter and tighten two M4×12 screws.
2. Put the WB37 battery into the battery slot, press down the battery and push it to the
bottom until the RELEASE button pops up. A clicking sound indicates the battery is
properly secured.
Press and hold the RELEASE button, and push the battery in the opposite direction of
installation to remove the battery.
Installing Adapter
When used with DJI RS 2 gimbal or other equipment that is compatible with cold shoe
interface, an adapter is required to be installed.
1. Install the adapter to the front of the video transmitter and tighten two M4×12 screws.
