©2012 DJI Innovations. All Rights Reserved.
9
Test
Please use the following procedures to test your installation, in order to make sure the OSD is working
properly.
STEP1.
Ensure batteries are fully charged for R/C transmitter, OSD and all the other devices on
your aircraft.
STEP2.
Make sure all connections and wiring is correct and secure.
STEP3.
Make sure the communication between the wireless video RX and TX modules is normal.
STEP4.
Switch on the R/C transmitter, and power on the OSD and autopilot system.
STEP5.
Check the LED indicator on the OSD. The OSD is powered when the LED is on.
STEP6.
If there are two video inputs, please select an input by toggling the TX 3-position switch;
otherwise, please skip to the next step.
STEP7.
If you use the wireless video RX and TX modules specified by DJI, please select the
channel you require by toggling the TX 3-position switch; otherwise, please skip to next step.
STEP8.
Observe the display screen to make sure the video and OSD information are displaying
on the screen.
