www.pcessflight.com
5
CHAPTER 2
LINKING OF RECIEVER AND TRANSMITTER
10J Transmitter Specifications
Type:
2-stick, 10-channel T-FHSS / S-FHSS / FHSS selectable
Current Drain:
140mA
System features
Futaba T-FHSS, S-FHSS 2.4GHz security
Airplane, heli, glider and multi-rotor software
30-model memory
S. Bus capable T-FHSS receiver
Telemetry
Synthesized voice for telemetry data
Vibration alerts for alarm conditions and low battery
User-updatable software (requires optional CIU-2 interface)
Wireless data transfer among 10J transmitters
Built-in S. Bus programming link for S. Bus servos
10-character model and user naming
Large (128 x 64 dot) backlit LCD display
Built-in diversity antenna
Jog dial and 3 buttons for fast, easy programming
Sub-trim and fail-safe (all channels)
Trim step adjustability
Trainer system
Throttle cut
2 count-up/-down integrated timer
Model timer
Range check mode
10 channels (one variable knob, five 2-position switches, two 3-position switches, one
Servo reversing, endpoint adjustment, digital trims, dual rates/exponential* & ATL
momentary switch, two digital levers)
Servo cycle w/bar graph displays
Assignable switch/lever/functions (Ch. 5-10)
Here are just some of the functions you'll find on the 10J:
The large backlit LCD display helps make
programming easy, as well as clearly showing
the timers and telemetry data.
Aeroplane mode
