dji MG-12000S, User Manual

Page: 6 / 26

5
Battery Life
LED1 LED2 LED3 LED4 Battery Life
100%
95%~99%
90%~94%
85%~89%
80%~84%
75%~79%
70%~74%
Below 70%
Charging the Battery
Press and release the status button once then press and hold to display charging status.
Battery Level Indicators While Charging
LED1 LED2 LED3 LED4 Battery Level
0%~49%
50%~74%
75%~99%
100%
Charging Exceptions
The table below shows battery protection mechanisms and corresponding LED patterns.
Battery Level Indicators While Charging
LED1 LED2 LED3 LED4 Blinking Pattern Battery Exception Item
Twice per second Over current detected
Twice per second Over charge detected
Three times per second Over-voltage charge detected
Twice per second Charging temperature is too low
Three times per second Charging temperature is too high
LED1 & LED4 Blink Difference in voltage too large
Charging should only be done with an approved charger. We take no responsibility if
the battery is charged by a non-official charger.
DO NOT charge the battery near flammable materials or on flammable surfaces such
as carpet or wood. Never leave the battery unattended during charging.
Disconnect the charger when not in use. Examine the charger regularly for damage
to the cord, plug, enclosure, or other parts. DO NOT clean the charger with
denatured alcohol or other flammable solvents. Never use a damaged charger.