dji MG-12000S, User Manual

Page: 5 / 26

4
DO NOT place loose battery cells on any conductive surfaces, such as a metal table.
DO NOT put battery on wires or other metals which may lead to short-circuit.
DO NOT drop or strike batteries. DO NOT place heavy objects on the battery or
charger.
Always clean the battery terminals with a clean, dry cloth. This will avoid the risk of
connection failure.
Make sure the batteries are fully charged before each flight.
Immediately land the aircraft if the critical battery level warning appears and charge
the battery.
Preheat the battery to above 41℉(5℃) (ideally above 68℉(20℃) when operating in
low temperature environments.
Checking the Battery Level
When the battery is in hibernation, press the Battery Level Indicator Button once to check
current battery level.
Battery Level Indicators also show the current battery level and its life cycle during
charging and discharging. The indicators are defined below:
LED is on LED is flashing LED is off
Battery Level Indicators
LED1 LED2 LED3 LED4 Battery Level
88% - 100%
75%~87%
63%~74%
50%~62%
38%~49%
25%~37%
13%~24%
0%~12%
Battery Life
When the battery is in hibernation, press and hold the Power Button for 5 seconds to check
battery life. The Battery Level Indicators will light up and/or blink as described below for 5
seconds. DO NOT use the battery when its battery life is below 80%.