background image

© 

2018 

DJI All Rights Reserved.

 

2

EN

Disclaimer

Thank you for purchasing the Battery Station (For TB50). Read this disclaimer carefully before 

using this product. By using this product, you hereby agree to this disclaimer and signify that 

you have read it fully. Please use this product in strict accordance with the document and 

be sure to pay attention to the Warnings. SZ DJI TECHNOLOGY CO., LTD. And its affiliated 

companies assume no liability for damage(s) or injuries incurred directly or indirectly from 

improper use of this product. Misuse includes, but is not limited to, using unapproved chargers, 

charging unapproved batteries, short-circuiting, overheating, modifying the product, or touching 

the terminals with skin or metal. Refer to the Safety Guidelines and Disclaimer, Intelligent Flight 

Battery Safety Guidelines, and User Manual for applicable information not herein contained.
DJI

TM

 is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated 

companies. Names of products, brands, etc., appearing in this document are trademarks 

or registered trademarks of their respective owner companies. This product and document 

are copyrighted by DJI with all rights reserved. No part of this product or manual shall be 

reproduced in any form without the prior written consent or authorization of DJI.
This disclaimer is produced in various languages. In the event of divergence among different 

versions, the Chinese version shall prevail when the product in question is purchased in China, and 

the English version shall prevail when the product in question is purchased in any other region.

Warnings

1. Keep any liquids (oil, water etc.) away from the inside of the Battery Station.

2. DO NOT close the Battery Station during charging or discharging, and ensure it is well 

ventilated and able to dissipate heat.

3. The Battery Station is only compatible with the TB50 Intelligent Battery, GL6D10A/GL800A 

Remote Controller and WB37-4920mAh-7.6V Intelligent Battery (need to connect with WCH2 

Charging Hub). DO NOT attempt to use the Battery Station with any other battery models.

4. Place the Battery Station on a flat and stable surface when in use. Ensure the device is 

properly insulated to prevent fire hazards.

5. DO NOT touch the metal terminals on the Battery Station. If there is any noticeable debris 

buildup, wipe the metal terminals with a clean, dry cloth.

6. Take care to avoid injuring fingers when opening or closing the Battery Station, or using the 

retractable trolley handle.

7. Place the batteries in the specified directions.

8. Air pressure in the Battery Station may change during air transportation or after extreme 

barometric pressure changes. The pressure valve knob on the side of the Battery Station will 

balance the air pressure automatically.

Introduction

Featuring multiple battery ports, the Battery Station can charge/discharge up to four TB50 

Intelligent Battery pairs (eight batteries). There are Normal and Quick modes for charging, Normal 

mode charges all inserted batteries simultaneously, and Quick mode charges the pair of batteries 

with the highest total charge first. Batteries can be discharged to a power level of about 25% or 

50% for transportation or storage. Using the remote controller port or the USB port, the Battery 

Station can also provide power to the INSPIRE

TM

 2 / RONIN

TM

 2 / MATRICE

TM

 200 series remote 

controller or mobile devices such as smartphones or tablets.
The Battery Station can hold up 12 TB50 Intelligent Batteries, two WB37-4920mAh-7.6V 

Intelligent Batteries and a WCH2 Charging Hub. Integrated wheels make the Battery Station easy 

to maneuver.

Reviews: