DJI FOCUS
User Manual
6
©
2015 DJI. All Rights Reserved.
System Status Indicator
The system status indicator is a white LED that is located on the remote controller.
Remote Controller
Description
Solid light
RC is connected to the Zenmuse X5 and functioning normally.
/ Forced update.
Blinks quickly
(4 times per second)
RC is disconnected from the Zenmuse X5. / RC is charging.
Settings
The Focus remote controller will display the following information when it is connected to the
Inspire 1 Pro or Raw system.
[1] Battery Level
[2] Focus Wheel Travel Percentage
[3] Focus Wheel Travel Bar
[4] Main Menu
[5] Connection Status
50.0%
Menu
[1]
[2]
[3]
[4]
[5]
Zenmuse X5 Settings
Aperture:
Enable or disable aperture control.
Direction:
The lens motor’s direction of rotation – normal or reversed.
Default:
Restore the default lens motor parameters.
Settings
Power Off:
Idle time before the remote controller auto-powers off-10 min, 30 min, 60 min or never.
Endpoints:
The upper and lower travel limits of the focus wheel. Turn the focus wheel to the
desired upper travel limit and select Set Point 1. Then, turn the focus wheel to the desired lower
travel limit and select Set Point 2. Turning the focus wheel from Point 1 to Point 2 will rotate the
camera focus by a full cycle.
LED Control:
Enable or disable the LED and system status indicators on the remote controller.
Default:
Restores the default settings for the remote controller.
About:
Displays the current firmware version of the remote controller.
