©
2015 DJI. All Rights Reserved.
5
Only use official DJI batteries that can be purchased on www.dji.com. DJI takes no
responsibility for any damage to your devices caused by non-DJI batteries.
Never use swollen, leaky, or damaged batteries. If your batteries show any abnormal
signs in performance, contact DJI or a DJI authorized dealer for assistance.
Never disassemble or pierce the battery in any way, or else the battery may leak, catch
fire, or explode.
DO NOT attach the batteries to wall outlets or car charger sockets directly, and always
use a DJI approved adapter. DJI takes no responsibility if the battery is charged using
a third party charger.
Attaching the Neck Strap
Pull down and hold the button on the neck strap connector, slide it through the mounting hole on
the bottom of the remote controller, and then release the button.
Ensure that the Zenmuse X5 camera lens is set to AF mode.
In the DJI GO app, ensure the shooting mode is set to 'M' (manual) or 'A' (aperture
priority).
Connection
To allow communication between the two devices, connect the communication port on the
Focus remote controller to the CAN Bus port on the Inspire 1 remote controller using the
dedicated CAN Bus cable.
