6
©
2015 DJI. All Rights Reserved.
EN
Yellow, blinking slowly
B------B------B… No signal input
—
Solid Yellow
None
Motors are rotating at full
throttle
Red, blinking quickly
None
Error, land your aircraft
immediately*
* Learn more about the possible errors by connecting the ESC to the ESC Assistant.
You can instantly tell what the unit’s status is by observing the LEDs
and listening to the sounds emitted from the ESC.
9. Specifications
Max. Thrust
3900 g/rotor (25 V, Sea Level)
Takeoff Weight (Recommended)
1200 ~ 1400 g/rotor (Sea Level)
Takeoff Weight (Max.)
1700 g/rotor (Sea Level)
Battery (Recommended)
6S LiPo
Working Temperature
-10 ~ 60°C
ESC
Max. Allowable Voltage
26 V
Max. Allowable Current (Persistent)
40 A
PWM Input Signal Level
3.3 V / 5 V Compatible
Signal Frequency
30 ~ 450 Hz
Battery
6S LiPo
Weight (with cable)
72 g
Weight (without cable)
35 g
Motor
Stator Size
42×16 mm
KV
310 rpm/V
Weight
205 g
Propeller
Diameter / Thread Pitch
17×6 inch
10. FAQs
Remounting the Propellers
1) Use the two Foldable Propeller mounting screws (M3×12.5 hexagon),
the two Propeller Cover mounting screws (M3×8), and the four propeller
washers to remount the propellers.
2) First line up and apply thread locker into the thread of the propeller mount,
then tighten the screws until the propeller blades are securely clamped and
can rotate freely.