EN
5
1. Push the battery compartment cover out.
2. Insert the 9 V battery into the compartment. Check that the positive and
negative terminals are correctly aligned. Push again to ensure secure
installation.
3. Remount the cover.
Turning the Analyzer On/Off
Turning On:
Press and hold the power button for two seconds to turn it on.
The lighting system will switch on, and the power indicator will show a solid
green light, indicating a normal start. A solid red light indicates low battery
level. Replace the battery as soon as possible.
Turning Off:
Press and hold the power button for two seconds to turn it off.
The power indicator and the lighting system will turn off. The analyzer will turn
off automatically if idle for more than eight minutes after being switched on.
Fixing the Analyzer
1. Align the lens of the analyzer to the camera of your mobile device with the
suction cups facing the device. Press the analyzer to fix it on the mobile
device via the suction cups.
2. Adjust the position of the analyzer so that all the suction cups are attached
to the mobile device sticking to the analyzer.
Droplet Analysis
Droplet
Analyzer
App
Place the test paper where you want to do droplet analysis on the plants. Spray
the liquid, then run the app and follow the instructions below for droplet analysis.
Data Collection
1. Tap “New Task”.
