5
CONTROLS AND FUNCTIONS
1. START/STOP BUTTON
Press this button to start or stop the platter.
2. PLATTER
3. MOTOR OFF
Press the button to enable motor off, and the led will
be flash.
Press the button again to disable function.
4. TARGET LIGHT
Insert target light to the deck and it will light up.
5. PLATTER SPEEDS
For 33 rpm - press 33
For 45 rpm - press 45
For 78 rpm - press 33 and 45 at the same time
To return to 33 or 45rpm play mode, just press the
desired button.
6. REVERSE
This button is used to reverse the direction of the
platter rotation.
7. PITCH SELECT
Sets the adjustment range of the pitch slider. Press the
button to switch to +/-10% pitch, press again to switch
to +/-20% pitch and again for +/-50%.
8.
QUARTZ
on - will hold the speed at 0%
off - will allow use of the pitch adjust.
9. HEADSHELL LOCKING NUT
Attach the headshell by inserting it into the front end of
the tonearm and then turn the locking nut clockwise.
10. PITCH SLIDER
Use this to change the speed of the platter when the
PITCH indicator is lit.
11. S-SHAPED TONEARM
12. 45 RPM ADAPTOR
Place on center spindle for playing 7” records with
large center holes.
13. ANTI SKATE KNOB
When a record is playing, a force is generated drawing
the stylus towards the center of the record. This
control compensates for that force and needs to be set
to the same value as the counterweight pressure ring.
14. COUNTERWEIGHT
Adjustment creates the proper downward pressure of
the stylus to the record. Attach now by sliding the
counterweight onto the rear of the tone arm. Twist it
lightly and it will screw onto the rear shaft of the tone
arm.
15. POWER SWITCH
This switch turns the power on or off.
16. POWER CORD CONNECTOR
Used to connect the included power cord.
17. USB SOCKET
USB connect (USB cable limit within 3M).
18. PHONO/LINE OUTPUT
Connect the turntable to any phono or line level input,
using the supplied cinch/cinch cable. Be sure to put
the phono/line switch in the right position.
19. PHONO/LINE SWITCH
Depending on the position of the phono/line switch,
you can connect the turntable to any phono or line
level input.
20. TONEARM LIFT
This elevates the tone arm above the record surface.
21. TONEARM CLAMP AND REST
Use this rest for the tone arm and clamp it in position
during transportation.
22. AC VOLTAGE SELECTOR
Make sure the selector is set properly.
