SEAMLESS LOOP
1. CREATING AND PLAYING A SEAMLESS LOOP
A seamless loop is a sound loop that plays continuously without
sound interruption. You can use this loop to create dramatic effect
in your mixing. This loop has no time limit and you could actually
loop the entire length of the current folder. You can create a
seamless loop between two continuous points of a music source
device as below:
(1) Press PLAY/PAUSE BUTTON to activate playback mode.
(2) Press the IN BUTTON. This will set the starting point of the
SEAMLESS LOOP. The IN BUTTON LED will
glow
.
(3) Press the OUT BUTTON to set the ending point for your
SEAMLESS LOOP. The IN BUTTON and OUT BUTTON LEDs
will immediately begin to flash rapidly, indicating the
SEAMLESS LOOP mode has been activated.
2. EXITING A LOOP
To exit a SEAMLESS LOOP, press the OUT BUTTON. The IN
BUTTON and OUT BUTTON LEDs will remain on, but will stop
flashing. Music playback will resume normal play. The IN
BUTTON, OUT BUTTON LEDs and RELOOP/LOOP indicator
in the LCD will remain on to remind you that a loop is stored in
memory.
3. REPLAY LOOP
The RELOOP function allows you to return to your stored
loop at any time. The IN BUTTON and OUT BUTTON LEDs
will indicate a loop is stored in memory, and may be played
at any time. To replay the loop, press the RELOOP BUTTON.
The IN BUTTON and OUT BUTTON LEDs will again begin
to flash indicating SEAMLESS LOOP mode has been
activated and your stored loop will immediately begin to play.
BASIC OPERATION
ESP
AÑOL
IT
ALIANO
NEDERLANDS
ENGLISH
FRA
NÇAIS
DEUTS
CH
10
