DJ-Tech UBM SOLO, User Manual

Page: 8 / 28

7
The Channel Strip
1. Input Level Meter with Noise Gate Threshold Control.
The Noise Gate helps to suppress audible noise when the input signal is below the threshold. Drag
the GATE label to an optimized threshold position that cuts unwanted noise while keeping tone
dynamics.
2. Mute.
Mutes the input signal. Note that the signal still goes to the VST plug-in allowing silent tuning and level
adjustments
3. Instrument selector.
Choice of Guitar, Bass or Microphone that loads VST plug-ins optimized for these types of inputs.
4. Edit.
This launches the VST plug-ins so they can be edited.*
5. Bypass.
Bypasses the effects for a “clean” tone.
6. Preset Selector.
This is where you select the effects preset. The PRESET knob on the UBM Solo can be used to change
these presets directly from the amp.
7. Save.
Allows the current configuration to be saved in any of the 64 preset locations.
8. Cho/Flg/Trm.
Controls the effect depth of the Chorus, Flanger, and Tremolo effects.
9. Pan.
Left/Right stereo balance of the input signal.
10. Vol.
Master volume for this input channel.
*
The first time Native Instruments Guitar Combo is launched, the plug-in will ask you to register the software.
Please follow the directions in this window to complete the registration process. Serial number for registration
can be found on the UBM Studio CD-ROM plastic bag.