10
Advanced Setup window
The UBM studio setup may need to be changed based on your PC setup. Press F12 or choose Option
-> Setup... from the main menu. The window will be shown as above. Many of these options are
advanced configuration features so be aware of the consequences when modifying these settings.
In the setup window it is possible to modify the audio buffer and latency values. A large value will
give very stable quality but more latency, and a smaller value will improve latency and audio
performance, but may make audio unstable depending on CPU speed and configuration. Note
that this can affect performance of the UBM Solo, so adjust it only if you have previous experience
with tuning the drivers.
VST plug-in file pathnames can be modified if you choose to install and run VSTs other than the
bundled software. Follow VST installation procedures from the VST manual to get the required setup
and path information. Controller setup and the assignment of pedal functions for the UBM Pedal are
modified in this section of the window. Use the drop-down menu items to select the desired pedal
function. Knob Sensitivity affects the sensitivity of Parameter encoder knob, making more detailed or
wider adjustments easier.
Other menu items are described below:
- Load/Save Scene – loads/saves current setting of all channels into external SCN file.
- Minimum/Normal/Full-screen View – adjusts the appearance of the window.
- Factory Reset – resets all presets. It can be used to initialize UBM Studio to be default settings if
necessary.
- Help – View Manual (F1) – shows this user manual on-screen.
Summary of Contents for UBM SOLO
Page 1: ...USER MANUAL 1 26...
Page 28: ...27...
