7 / 10
5.2.5. LED Colour setting
-
Push the MENU button until you see COLO in the display.
- Confirm
with
ENTER.
There are four channels in total, matching with the four buttons on the wireless remote. Press
UP or DOWN to set the color of LED under each channel . After finishing setting, press
ENTER again to back to page COLO. The LED’s color could be set to OFF, 9 colors (Co1-
Co9) and change color automatically (rand).
When set to OFF, the LED would not light.
The 9 colors are as following:
Co 1: Red
Co 2: Green
Co 3: Blue
Co 4: Pink
Co 5: Purple
Co 6: Orange
Co 7: Yellow
Co 8: Sky blue
Co 9: White
After setting the above color, the LED will show the corresponding color when the remote is controlling
the smoke output.
On the condition of changing color automatically, the LED will change colors at 1s interval when the
remote is controlling the smoke output.
Note: when the DMX controller is used, the LED’s color would be controlled by DMX controller instead
of this setting page.
5.2.6. Activate the remote
-
Push the MENU button until you see REMO in the display.
- Confirm
with
ENTER.
-
Please use the UP/DOWN buttons to choose ON or OFF.
-
Confirm again with ENTER to leave the menu.
-
To confirm the control of the remote with the machine do as described above.
Summary of Contents for DSK 1500 V
Page 1: ...User manual DSK 1500 V...