6 / 10
5.2.2. Side for heating up
The LCD display will show as in the chart when the machine is heating. It will exit this page and
display the default page "ADDR" after finishing heating.
5.2.3. Setup
wireless
controller
When the wireless control function is activated, LCD display will show as in the chart as soon as the
machine is power on. The line will increase gradually, and the LCD display will exit this page till the
line is full (12 lines). It costs 12 seconds to finish, during this time, press any buttons on the W-4
controller, the LCD display will flash twice, which means the successful match between W-4 remote
controller and fog machine and then the W-4 controller can control the fog machine.
Attention: There would be no response for rematch.
5.2.4. Setup DMX address
-
Push the MENU button until you see ADDR in the display.
- Confirm
with
ENTER.
-
Please use the UP/DOWN buttons to choose a value between 001 – 512.
-
Please note that this machine needs 8 DMX channels.
Summary of Contents for DSK 1500 V
Page 1: ...User manual DSK 1500 V...