VR4040CS-AL Vapor Hose Coupler
4
090121 REV 0 VR4040CS-AL
THE POPPET (3) IS HELD UNDER CONSIDERABLE SPRING
TENSION. PERSONAL INJURIES MAY RESULT IF THIS
PRECAUTION IS NOT TAKEN. HOLD THE POPPET (3) FIRMLY
WHEN REMOVING THE O-RING (8) AND RELEASE THE POPPET
(3) SLOWLY.
4. Remove the gasket (4). Install the new gasket (4). Make sure that
the gasket (4) sits in the groove properly.
5. Install the spring (5) and the poppet (3). Push the poppet (3) into
the coupler and hold. Install the new O-Ring (8) and make sure that
the O-Ring (8) sits in the poppet (3) groove properly.
6. Install the cage (2) to the poppet (3) using the machine screws (6)
and a screwdriver.
DIXON BAYCO WARRANTY:
For Warranty Information, please refer to the inside back cover of the
latest Dixon Catalog.
