Dixon DX152, Operator'S Manual

Page: 36 / 68

1
2
OPeRaTION
36
WARNING!
No adjustments or maintenance should
be carried out unless:
• the engine stopped
• the ignition key removed
• the parking brake activated
Moving Machine By Hand
8058-059
1. IZt locked into the bypass position
2. Linkage lever, engaged
Right side, IZT linkage
When pushing or pulling the mower, engage the IZt
(Integrated Zeroturn transaxle) bypass linkages. the
linkages are located on each side of the rear of the
unit below the engine plate.
1. Raise the deck to the highest (transport) position.
2. engage the parking brake.
3. Pull the bypass linkages up and out of the
keyhole slots. Release the lever with the head
outside the bracket and held into the bypass
setting.
4. to reengage the IZts to drive, reverse the above
procedure.
Load the machine into truck or trailer by driving slowly
up the ramps. DO nOt LIFt! the machine is not
intended to be lifted by hand.
WARNING!
Use extreme caution when loading the
machine into a truck or trailer using
ramps. There is the possibility of serious
injury or death if the machine falls off the
ramps.