Dixie Narco DPSL5 E, Technical Manual

Page: 9 / 77

PROGRAMMING
8
The escrow condition is forced vend option 2 (“escrow no cancel”) with all bills stacked, and no cancel
sale allowed unless the vender is in exact change and the maximum vend price is exceeded. Note: Any
money entered below the vend price cannot be returned
ES 4 – Escrow to Select 4
The escrow condition is "escrow to select" with all dollar bills being stacked. Cancel sale will return the
deposit from the coin changer (i.e. 4 quarters).
ES 1 – Escrow to Select 1
The escrow condition is "escrow to select dollar bills" with the last dollar bill that meets or exceeds
maximum vend price being escrowed in the validator. Cancel sale will return the held dollar bill and any
amount over $1 will be returned from the coin changer.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
MV – Multi Vend :
This function, when turned on, allows credit to be retained after a vend so the customer can vend from another
selection. (i.e. .50¢ vend price, put in $1.00, push a select button and vends, 50¢ still shows on display, push a
second selection button and vends). Credit is cancelled after 5 minutes of inactivity. There is unlimited
acceptance. If a customer wants their credit (money) back, the coin return lever must be pressed. To show
current "MV" condition, press select button 1 and the display will show the current setting. Press and hold Select
Button 1 to toggle "MV" from on and off.
Press and hold Select Buttons 1 and 2 simultaneously to move to the next item on the menu.
RTN - Return:
This function is used to return to “C-S” – Cash Settings.
Press and hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
USER - User Menu
This function is used to configure the vender to operate in the fashion best suited for the vender location. To
move to “DIAG” - Diagnostics, press & hold select buttons 1 & 2 simultaneously, to enter the USER sub-menus
press select button 1. The following are sub-menus of the User Menu: "STS” - Space To Sales, "Time", "LANG” -
Language, "ECNT” - Electronic Counter, "LIM” - Limited Access, "SEC” - Secondary Price, “ECTL” –
Environmental Controls, "LT” - Light, “RFRG” - Refrigeration, "FREE” - Free Vend, “OVER” - Override, “SSM” -
Sales Message, “R-CH” - Recharge, and "RTN” - Return.
STS - Space To Sales
To view the space to sales condition, press select button 1 and display will show “SEL 1” – Selection 1 alternating
with columns assigned to that select button. Press select buttons 1 & 2 simultaneously to scroll through the
available select buttons to view columns assigned and “Return”.
To change space to sales:
Press select button 1 at the, "SEL #" prompt and “CL## #” (column edit routine) will be displayed, where the ## is
the first column to be added or deleted to the select button and the third # is “0” for not assigned or “1” for
assigned to that selection. Press select button 1 with the “CL## #” on the display to toggle between “CL## 0” and
“CL## 1”. With the setting you wish to use showing on the display press select buttons 1 & 2 to scroll to next
selection to add/delete columns or “RTN”. Press select button 1 at the “RTN” prompt will return to “STS”.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
Time
This function is used to set the year, month, day, hour/minute (military 24 hour clock), and daylight savings time.
Press select button 1 and “YEAR” will show on display. Press select buttons 1 and 2 simultaneously to scroll
through all “Time” sub-menus.
"
YEAR " - Year Setting (00 to 99)
Press select button 1 the current year setting will show on display.
Press and hold select button 1 to increment the year setting (2000 to 2099). Release select button 1 and press
and hold again will decrement the year setting.
Release the select button with the display showing the year you wish to use and display will return to "Year".