Divus VIDEOPHONEBOX, User Manual

Page: 9 / 28

DIVUS Videophone-Box User Manual .
9
1. Connect the power supply Audio to a 230V power socket
2. Connect the RJ11 phone cable with the a/b phone line of the intercom system
3. Connect the RJ45 network cable Audio (VoIP) with the local network (Switch/Router)
Video: A video server converts the analogue video signal from the intercom system into a network stream. The
required connections are the following:
4. Connect the power supply Video to a 230V power socket.
5. Connect the RCA video cable to the analogue video signal of the intercom system.
6. Connect the RJ45 network cable to the local network (Switch/Router)
2.3 CONFIGURATION OF THE INTERCOM SYSTEM
The video intercom system must be configured in a way that in presence of a telephone call from the external
unit the a/b phone signal and the video signal are activated by the conversion modules of the intercom system.
Normally such conversion modules are handled like internal units inside the intercom bus system.