- 4 -
3.1.1
INSTALLATION 1
(Cable through the wall with the mount base)
A. Drill the mounting location, using the template sheet (or the bottom of the
mount base) as a template.
B. Insert the plastic anchors into the hole which has just drilled.
C. Connect BNC cable and communication lines.
D. Fit the screw holes of the mount base into the plastic anchors.
E. Screw up the mount screws (T-20).
F. Adjust the camera suitably using the pan & tilt function, and fasten both the
socket set screw (1x) and torx lock screw (2x) to fix the camera.
Socket Set Screw
M5.0, L=5.0mm
Hexagon Wrench
Torx Screws (T-20)
M6.0 x 35.0 (4x)
Wall
Mount Base
Plastic Anchors (4x)
Template Sheet
A
B
Torx Lock Screw (T-20)
B
A
